alarsyo/spot
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity

bin: add support for -b/--buchi

Browse source 
* bin/common_post.cc, bin/randaut.cc: Implement -b/--buchi.
Also add --sba as alias for -B, and --gba as alias for --tgba.
* NEWS: Document those changes.
* doc/org/ltl2tgba.org, doc/org/oaut.org: Adjust documentation.
* tests/core/ltl2tgba2.test, tests/core/ltlcross2.test,
tests/core/randaut.test: Add more tests.
* tests/core/sbacc.test: --sbacc cannot be abbreviated as --sba
anymore.
This commit is contained in:
Alexandre Duret-Lutz 2020-12-15 17:55:39 +01:00
parent 7c6b35313a
commit 8785f5a74b
9 changed files with 520 additions and 479 deletions
Download patch file Download diff file Expand all files Collapse all files

204
doc/org/ltl2tgba.org
View file

@ -15,8 +15,10 @@ Those options will be covered in more detail below, but here is
a quick summary:
- =--tgba= (the default) outputs Transition-based Generalized Büchi
Automata
- =--ba= (or =-B=) outputs state-based Büchi automata
Automata,
= =--buchi= (or =-b=) outputs transition-based Büchi automata,
- =--sba= (or =-B=) outputs state-based Büchi automata
(=--ba= is a historical alias for this option)
- =--monitor= (or =-M=) outputs monitors
- =--generic --deterministic= (or =-DG=) will do whatever it takes to
produce a deterministic automaton, and may use any acceptance
@ -24,8 +26,19 @@ a quick summary:
- =--parity --deterministic= (or =-DP=) will produce a deterministic
automaton with parity acceptance.
(The latter two can also be used with =--deterministic=, but that is
less frequent.)
The latter two can also be used without =--deterministic=, but that is
less frequent.
Except for =-B= which forces state-based acceptance, these options
build transition-based automata by default. Internally, Spot only
supports transition-based automata. However, while transition-based
automata can be smaller then their state-based counterpart, there are
many cases where transition-based acceptance does not bring any benefits.
In case where it is detected that the transition-based automaton looks
like a state-based automaton, the different automaton printers will
usually present the result as an automaton with state-based acceptance
for simplicity.
* TGBA and BA
@ -57,11 +70,11 @@ State: 1
--END--
#+end_SRC
Actually, because =ltl2tgba= is often used with a single formula
passed on the command line, the =-f= option can be omitted and any
command-line parameter that is not the argument of some option will be
assumed to be a formula to translate (this differs from [[file:ltlfilt.org][=ltlfilt=]],
where such parameters are assumed to be filenames).
As =ltl2tgba= is often used with a single formula passed on the
command line, the =-f= option can be omitted and any command-line
parameter that is not the argument of some option will be assumed to
be a formula to translate (this differs from [[file:ltlfilt.org][=ltlfilt=]], where such
parameters are assumed to be filenames).
=ltl2tgba= honors the [[file:oaut.org][common options for selecting the output format]].
The default output format, as shown above, is the [[file:hoa.org][HOA]] format, as this
@ -69,7 +82,7 @@ can easily be piped to other tools.
To convert the automaton into a picture, or into vectorial format, use
=--dot= or =-d= to request [[http://www.graphviz.org/][GraphViz output]] and process the result with
=dot= or =dotty=. Typically, you could get a =pdf= of this TGBA using
=dot= or =dotty=. Typically, one can get a =pdf= of this TGBA using
#+BEGIN_SRC sh :exports code
ltl2tgba "Fa & GFb" -d | dot -Tpdf > tgba.pdf
#+END_SRC
@ -92,10 +105,10 @@ $txt
Characters like ⓿, ❶, etc. denotes the acceptance sets a transition
belongs to. In this case, there is only one acceptance set, called
=0=, containing a single transition. You may have many transitions in
the same acceptance set, and a transition may also belong to multiple
=0=, containing a single transition. An acceptance set can contains
multiple transitions, and a transition may also belong to multiple
acceptance sets. An infinite path through this automaton is accepting
iff it visit each acceptance set infinitely often. Therefore, in the
iff it visits each acceptance set infinitely often. Therefore, in the
above example, any accepted path will /necessarily/ leave the initial
state after a finite amount of steps, and then it will verify the
property =b= infinitely often. It is also possible that an automaton
@ -137,99 +150,66 @@ these acceptance sets ensures that atomic propositions =a= and =b= must
be true infinitely often.
A Büchi automaton for the previous formula can be obtained with the
=-B= option:
=-B= or =-b= options, depending on whether we insist on have
state-based acceptance (=-B=) or if transition-based acceptance is OK
(=-b=).
#+NAME: dotex2tba
#+BEGIN_SRC sh :exports code
ltl2tgba -b 'GFa & GFb' -d
#+END_SRC
#+BEGIN_SRC dot :file dotex2tba.svg :var txt=dotex2tba :exports results
$txt
#+END_SRC
#+RESULTS:
[[file:dotex2tba.svg]]
#+NAME: dotex2ba
#+BEGIN_SRC sh :exports code
ltl2tgba -B 'GFa & GFb' -d
#+END_SRC
#+RESULTS: dotex2ba
#+begin_example
digraph G {
rankdir=LR
node [shape="circle"]
fontname="Lato"
node [fontname="Lato"]
edge [fontname="Lato"]
node[style=filled, fillcolor="#ffffa0"] edge[arrowhead=vee, arrowsize=.7]
I [label="", style=invis, width=0]
I -> 0
0 [label="0", peripheries=2]
0 -> 0 [label=<a &amp; b>]
0 -> 1 [label=<!b>]
0 -> 2 [label=<!a &amp; b>]
1 [label="1"]
1 -> 0 [label=<a &amp; b>]
1 -> 1 [label=<!b>]
1 -> 2 [label=<!a &amp; b>]
2 [label="2"]
2 -> 0 [label=<a>]
2 -> 2 [label=<!a>]
}
#+end_example
#+BEGIN_SRC dot :file dotex2ba.svg :var txt=dotex2ba :exports results
$txt
#+END_SRC
#+RESULTS:
[[file:dotex2ba.svg]]
Although accepting states in the Büchi automaton are (traditionally)
pictured with double-lines, internally this automaton is still handled
as a TGBA with a single acceptance set such that the transitions
leaving the state are either all accepting, or all non-accepting. You
can see this underlying TGBA if you pass the =--dot=t= option (the =t=
requests the use of transition-based acceptance as it is done
internally):
Although accepting states in state-based Büchi automaton are
(traditionally) pictured with double-lines, internally this automaton
is still handled as a TGBA with a single acceptance set such that the
transitions leaving the state are either all accepting, or all
non-accepting. The underlying TGBA can be seen by passing the
=--dot=t= option (the =t= requests the use of transition-based
acceptance, as it is done internally):
#+BEGIN_SRC sh :exports code
ltl2tgba --dot=t -B 'GFa & GFb'
ltl2tgba -B 'GFa & GFb' --dot=t
#+END_SRC
#+NAME: dotex2ba-t
#+BEGIN_SRC sh :exports none
ltl2tgba --dot=.t -B 'GFa & GFb'
ltl2tgba -B 'GFa & GFb' --dot=.t
#+END_SRC
#+RESULTS: dotex2ba-t
#+begin_example
digraph G {
rankdir=LR
fontname="Lato"
node [fontname="Lato"]
edge [fontname="Lato"]
node[style=filled, fillcolor="#ffffa0"] edge[arrowhead=vee, arrowsize=.7]
I [label="", style=invis, width=0]
I -> 0
0 [label="0"]
0 -> 0 [label=<a &amp; b<br/><font color="#5DA5DA">⓿</font>>]
0 -> 1 [label=<!b<br/><font color="#5DA5DA">⓿</font>>]
0 -> 2 [label=<!a &amp; b<br/><font color="#5DA5DA">⓿</font>>]
1 [label="1"]
1 -> 0 [label=<a &amp; b>]
1 -> 1 [label=<!b>]
1 -> 2 [label=<!a &amp; b>]
2 [label="2"]
2 -> 0 [label=<a>]
2 -> 2 [label=<!a>]
}
#+end_example
#+BEGIN_SRC dot :file dotex2ba-t.svg :var txt=dotex2ba-t :exports results
$txt
#+END_SRC
#+RESULTS:
[[file:dotex2ba-t.svg]]
Using option =-S= instead of option =-B= you can obtain generalized
Büchi automata with state-based acceptance. Here is the same formula
as above, for comparison.
Option =-B= is in fact a shorthand for =-b -S=, where =-b= requests
Büchi acceptance, and =-S= requests state-based acceptance.
Calling =ltl2tgba -S= will build an automaton with generalized Büchi
acceptance (the default for =ltltgba=), but force state-based
acceptance on the output.
Here is the same formula as above, for comparison.
#+NAME: dotex2gba
#+BEGIN_SRC sh :exports code
ltl2tgba -S 'GFa & GFb' -d
#+END_SRC
#+BEGIN_SRC dot :file dotex2gba.svg :var txt=dotex2gba :exports results
$txt
#+END_SRC
@ -254,23 +234,32 @@ ltl2tgba --help | sed -n '/Output format:/,/^$/p' | sed '1d;$d'
--lbtt or --spin)
--check[=PROP] test for the additional property PROP and output
the result in the HOA format (implies -H). PROP
may be any prefix of 'all' (default),
'unambiguous', 'stutter-invariant', or
'strength'.
-d, --dot[=1|a|b|B|c|e|f(FONT)|h|n|N|o|r|R|s|t|v|+INT]
may be some prefix of 'all' (default),
'unambiguous', 'stutter-invariant',
'stutter-sensitive-example', 'semi-determinism',
or 'strength'.
-d, --dot[=1|a|A|b|B|c|C(COLOR)|e|E|f(FONT)|h|k|K|n|N|o|r|R|s|t|u|v|y|+INT|<INT|#]
GraphViz's format. Add letters for (1) force
numbered states, (a) acceptance display, (b)
numbered states, (a) show acceptance condition
(default), (A) hide acceptance condition, (b)
acceptance sets as bullets, (B) bullets except for
Büchi/co-Büchi automata, (c) force circular
nodes, (e) force elliptic nodes, (f(FONT)) use
FONT, (h) horizontal layout, (v) vertical layout,
(n) with name, (N) without name, (o) ordered
transitions, (r) rainbow colors for acceptance
sets, (R) color acceptance sets by Inf/Fin, (s)
with SCCs, (t) force transition-based acceptance,
(+INT) add INT to all set numbers
-H, --hoaf[=i|l|m|s|t|v] Output the automaton in HOA format (default). Add
letters to select (i) use implicit labels for
nodes, (C) color nodes with COLOR, (d) show
origins when known, (e) force elliptic nodes, (E)
force rEctangular nodes, (f(FONT)) use FONT, (g)
hide edge labels, (h) horizontal layout, (k) use
state labels when possible, (K) use transition
labels (default), (n) show name, (N) hide name,
(o) ordered transitions, (r) rainbow colors for
acceptance sets, (R) color acceptance sets by
Inf/Fin, (s) with SCCs, (t) force transition-based
acceptance, (u) hide true states, (v) vertical
layout, (y) split universal edges by color, (+INT)
add INT to all set numbers, (<INT) display at most
INT states, (#) show internal edge numbers
-H, --hoaf[=1.1|i|k|l|m|s|t|v] Output the automaton in HOA format
(default). Add letters to select (1.1) version
1.1 of the format, (i) use implicit labels for
complete deterministic automata, (s) prefer
state-based acceptance when possible [default],
(t) force transition-based acceptance, (m) mix
@ -287,40 +276,17 @@ ltl2tgba --help | sed -n '/Output format:/,/^$/p' | sed '1d;$d'
-s, --spin[=6|c] Spin neverclaim (implies --ba). Add letters to
select (6) Spin's 6.2.4 style, (c) comments on
states
--stats=FORMAT output statistics about the automaton
--stats=FORMAT, --format=FORMAT
output statistics about the automaton
#+end_example
Option =-8= can be used to improve the readability of the output
if your system can display UTF-8 correctly.
on systems that can display UTF-8 correctly.
#+NAME: dotex2ba8
#+BEGIN_SRC sh :exports code
ltl2tgba -B8 "GFa & GFb" -d
ltl2tgba -8B "GFa & GFb" -d
#+END_SRC
#+RESULTS: dotex2ba8
#+begin_example
digraph G {
rankdir=LR
fontname="Lato"
node [fontname="Lato"]
edge [fontname="Lato"]
node[style=filled, fillcolor="#ffffa0"] edge[arrowhead=vee, arrowsize=.7]
I [label="", style=invis, width=0]
I -> 0
0 [label=<0<br/><font color="#5DA5DA">⓿</font>>]
0 -> 0 [label=<a∧b>]
0 -> 1 [label=<b̅>]
0 -> 2 [label=<a̅∧b>]
1 [label=<1>]
1 -> 0 [label=<a∧b>]
1 -> 1 [label=<b̅>]
1 -> 2 [label=<a̅∧b>]
2 [label=<2>]
2 -> 0 [label=<a>]
2 -> 2 [label=<a̅>]
}
#+end_example
#+BEGIN_SRC dot :file dotex2ba8.svg :var txt=dotex2ba8 :exports results
$txt
#+END_SRC